Comon alarm faults Hillsborough

This is normally the chime function on your alarm, you will need to switch the chime function following your manual.
In most cases this is your alarm battery requiring replacing. It is advised your battery should be replaced every 4 years.
On older burglar alarm keypads the contacts build carbon behind the keys.This can be repaired as part of a service visit and it is not advised to be carried out by the customer.
This is sometimes down to being too fast with your key inputs. A steady rate of key pressing will normally relieve this problem.
This can occur if the system has a tamper fault or the triggering of a panic device. A tamper condition can require an engineer visit. 24 hour zones will need clearing before the system can reset